Polyurethane Core Doors

  • 1 3/4” standard; other thicknesses available
  • Any manufacturer’s hinge locations
  • 18-gauge A40 galvannealed steel standard
  • ANSI 250.8 Model 2, continuously welded vertical edges (seamless) standard
  • Rust inhibitive prime coat ANSI/SDI A250.10
  • Thermal barrier U-Factor = 0.36 and R-value = 2.77; tested per SDI-113, ASTM C1363
  • 2lb density polyurethane core permanently bonded to both face sheets*

Material Options

  • 16-gauge, 14-gauge steel
  • A60, G90, CRS

Feature Options

  • Channeled lite cutout or integral lite option
  • Flush top cap
  • Any manufacturer’s deadlock prep, panic prep, and mortise sectional trim
  • Flat bar astragal (pairs)

Hardware Reinforcements

  • 3/16” for hinges
  • 12-gauge for locks standard
  • 14-gauge for closers standard
  • Heavier gauge reinforcements available

*We use polyisocyanurate cores, a form of polyurethane found to be more stable and rigid.

DCI Hollow Metal on Demand | Stainless Steel Doors | Polyurethane Core Doors