- Fire-rated up to STC 53 for singles and STC 48 for pairs of doors
- DCI’ patented STC core design
- Up to and including STC 48 for pairs of doors; includes factory-supplied astragal
- All STC ratings available for single doors up to and including STC 54
- 1 3/4” doors (lightweight for STC doors)
- Any manufacturer’s hinge locations
- Continuously welded vertical edges (seamless) standard
- Uses 4 1/2” 180 heavyweight hinge (not supplied)
- No cam lift hinge required
- All required seals and a threshold are included
- Galvannealed steel standard
- Single door vision lites available up to and including STC 48
- Interior and exterior use
- Rust inhibitive prime coat ANSI/SDI A250.10
- Tested in accordance with ASTM E90-09
- Frame must be grout filled (by others)
- STC frames available
Material Options
- Stainless steel, available in 304 or 316 alloys
Feature Options
- Up to 90-minute fire rating (Except STC54)
- Integral lite option
- Flush top cap
- Any manufacturer’s Deadlock prep, Panic prep, and Mortise sectional trim
- Astragal (for pairs)
Hardware Reinforcements
- 3/16” for hinges
- 12-gauge for locks standard
- 14-gauge for closers standard
- Heavier gauge reinforcements available
