Bullet Resistant Doors

  • Tested in accordance with UL 752 level 1 through 8 for ballistic products
  • 1 3/4” standard
  • Any manufacturer’s hinge locations
  • 16-gauge galvannealed steel standard
  • Minimum 16-gauge steel faces
  • Continuously welded vertical edges (seamless) standard
  • Rust inhibitive prime coat ANSI/SDI 250.10
  • Bullet resistant frames available

Material Options


Feature Options

  • Vision Lite Frame
  • Flush top cap
  • Any manufacturer’s Deadlock prep, Panic prep, and Mortise sectional trim

Hardware Reinforcements

  • 3/16” for hinges
  • 12-gauge for locks standard
  • 14-gauge for closers standard
  • Heavier gauge reinforcements available
DCI Hollow Metal on Demand | Stainless Steel Doors | Blast Resistant Door

Resources



Downloads



Technical Documents