Technical Data Sheet

Commercial Steel Doors

• 1 ¾” standard; other thicknesses available
• Any manufacturer’s hinge locations
• 18-gauge steel A60 galvannealed standard
• 20-gauge stiffeners spot-welded at 6" on center with thermafiber insulation
• Continuously welded vertical edges (seamless) standard
• Rust inhibitive prime coat ANSI/SDI 250.10-1998

MATERIAL OPTIONS

• 16-gauge, 14-gauge, 12-gauge, and 10-gauge steel
• G90 galvanized steel
• Stainless steel, available in 304 or 316 alloys
• 18-gauge stiffeners spot-welded

FEATURE OPTIONS FOR COMMERCIAL STEEL DOORS

• Up to 3 hour fire label
• Integral lite option
• Integral louver option (1)
• Flush top cap (1)
• Any manufacturer’s Deadlock prep (1,2), Panic prep (1), and Mortise sectional trim (1)
• Flat bar astragal (pairs) (1)

HARDWARE REINFORCEMENTS

• 3/16" for hinges
• 12-gauge for locks standard
• 14-gauge for closers standard
• Heavier gauge reinforcements available

(1) Optional feature for an additional charge
(2) Some trim options are not available in the stock program

Back to Doors Overview >>

Please contact DCI for more information on Commercial Steel Doors.

Commercial Steel Doors